The Pentair IntelliFloXF is the gold standard for commercial variable speed pool pumps. This guide covers every spec, the real price difference between retail and wholesale, installation requirements, and how to get it at the best price for your next commercial build.
The Pentair IntelliFloXF is one of the most specified commercial variable speed pumps in the United States — and for good reason. With a 140 GPM max flow rate, a TEFC permanent magnet motor, and native integration with Pentair automation, it's the go-to pump for mid-to-large commercial pools. But before you buy, there's a lot to understand: which model number is right for your application, what it costs retail vs wholesale, and what installation requirements you need to plan for.
Pentair IntelliFloXF: Full Specifications
| Specification | Value |
|---|---|
| Model Number (Standard) | 011056 |
| Model Number (w/ IntelliFlo Interface) | 011057 |
| HP (Service Factor) | 3.0 HP (3.45 SF) |
| Max Flow Rate | 140 GPM |
| Speed Range | 450 – 3,450 RPM |
| Voltage | 208–230V, 60Hz, 1-Phase |
| Amperage (Full Speed) | 17.1A |
| Motor Type | TEFC Permanent Magnet |
| Certifications | DOE Compliant, UL Listed, cUL Listed |
| Plumbing Size | 2" or 2.5" unions (included) |
| Warranty | 3 years (parts & labor) |
| Programmable Speeds | 8 speed settings |
| Interface | Digital LED display, standalone or automation |
IntelliFloXF vs IntelliFlo VSF: What's the Difference?
The most common confusion is between the IntelliFloXF and the IntelliFlo VSF (Variable Speed + Flow). They look similar but serve different markets.
| Feature | IntelliFloXF (011056) | IntelliFlo VSF (011028) |
|---|---|---|
| Application | Commercial / Heavy Residential | Residential |
| Max HP | 3.0 HP | 1.5 HP |
| Max Flow | 140 GPM | 90 GPM |
| Motor | TEFC (outdoor commercial) | TEFC (residential) |
| Flow Meter | No | Yes (built-in) |
| Automation | Native Pentair | Native Pentair |
| Warranty | 3 years | 3 years |
| Best For | 50,000+ gal commercial | Up to 25,000 gal residential |
If your pool is under 25,000 gallons and residential, the IntelliFlo VSF is typically sufficient and slightly less expensive. For commercial pools, municipal pools, HOA pools, or any pool over 25,000 gallons, always specify the IntelliFloXF. The commercial TEFC motor handles extended run times and outdoor conditions that would shorten a residential motor's lifespan.
IntelliFloXF Price: Retail vs Wholesale
The IntelliFloXF has a standard retail MSRP in the $900–$1,100 range depending on the retailer. However, contractors and pool builders purchasing through a wholesale distributor like Pool Supply Wholesalers pay significantly less — typically 20–35% below retail MSRP.
| Channel | Typical Price Range | Notes |
|---|---|---|
| Big Box Retail (Home Depot/Lowe's) | $1,050 – $1,150 | Limited availability, residential focus |
| Online Retail (Amazon, etc.) | $950 – $1,100 | Varies, check authorized seller status |
| Local Pool Supply Store | $900 – $1,050 | May have contractor discounts |
| Wholesale Distributor (Pool Supply Wholesalers) | $650 – $850 | Direct wholesale to retail pricing, no membership required |
Pentair's warranty is only valid when purchased from an authorized distributor. Always verify the seller is an authorized Pentair dealer before purchasing. Pool Supply Wholesalers is a fully authorized Pentair distributor — all products include full manufacturer warranty.
Installation Requirements
The IntelliFloXF requires 208–230V, 1-phase power with a dedicated 20-amp circuit breaker. It is not compatible with 120V power. For commercial installations, always verify local electrical code requirements — many jurisdictions require a licensed electrician for pool pump wiring.
- Dedicated 20A, 208–230V circuit required
- Compatible with standard 2" and 2.5" pool plumbing (unions included)
- Can be installed standalone (uses built-in LED display) or integrated with Pentair EasyTouch, IntelliCenter, or IntelliConnect automation
- Must be mounted on a firm, level surface with adequate ventilation around the motor
- For above-ground installations: mount below pool water level when possible to ensure prime retention
- Noise level: approximately 45–55 dB at standard filtration speeds (quieter than single-speed pumps at full RPM)
Programming the IntelliFloXF for Commercial Applications
Unlike residential pumps that run on simple timers, commercial pools often need the IntelliFloXF configured for multiple speed schedules: high speed for turnover cycles and feature operation, lower speeds for off-peak filtering, and a 'freeze protection' mode for cold-climate installations.
- 1Set Speed 1 (Filtration): 1,500–2,000 RPM for standard filtration turnover
- 2Set Speed 2 (Feature Mode): 2,500–3,000 RPM for waterfalls, spa jets, or cleaners
- 3Set Speed 3 (High Flow): 3,200–3,450 RPM for backwash or high-demand periods
- 4Set Speed 4 (Minimum): 600–900 RPM for water circulation in spa mode or off-peak
- 5Configure freeze protection threshold (usually 40°F trigger) if in freeze-risk climate
- 6Set daily runtime schedule: filtration speed during off-peak utility hours saves maximum energy cost
Where to Buy Pentair IntelliFloXF at Wholesale Pricing
Pool Supply Wholesalers carries the full Pentair IntelliFloXF line — model 011056 (standard) and 011057 (with IntelliFlo interface) — at direct wholesale to retail pricing. We ship same-day from Nashville TN, Los Angeles CA, Dallas TX, and Orlando FL distribution hubs. No membership or minimum order required — all pricing reflects our wholesale trade pricing structure, typically 20–35% below standard retail MSRP.
Frequently Asked Questions
Is the Pentair IntelliFloXF good for commercial pools?
Yes. The IntelliFloXF (model 011056) is specifically designed for commercial applications. Its TEFC permanent magnet motor handles extended runtime duty cycles, and the 140 GPM max flow covers pools up to approximately 100,000 gallons in single-pump configurations. For larger commercial applications, dual-pump configurations are common.
What is the Pentair IntelliFloXF model number?
The standard Pentair IntelliFloXF model number is 011056. The version with the IntelliFlo interface (for use with IntelliConnect or EasyTouch automation without a separate interface kit) is model 011057. Both are the same pump mechanically — the difference is the automation interface included.
Does the IntelliFloXF qualify for utility rebates?
Yes. The Pentair IntelliFloXF is ENERGY STAR certified and qualifies for utility rebates in most US states. Rebate amounts vary significantly by utility company — common rebates range from $100 to $400 per pump. Check your local utility's website or the ENERGY STAR rebate finder for exact amounts in your area.
How loud is the Pentair IntelliFloXF?
At standard filtration speeds (1,500–2,000 RPM), the IntelliFloXF produces approximately 45–52 dB — similar to a quiet conversation or a refrigerator hum. At full speed (3,450 RPM), noise increases to roughly 60–65 dB. Variable speed operation means most of the pump's runtime is at quieter low-to-mid speeds.
